تم اصدار النسخة الجديدة من ميكروتك 5.7

What's new in 5.7 (2011-Sep-14 10:54):
ما الجديد في نسخة ميكروتك 5.7
*) ovpn client - fixed crash when user name or password together
   were longer than 11 symbols;
*) sstp client - added an option to skip
    server address verification from certificate;
*) fixed problem - router crashed sometimes when using USB modem;
*) userman - show overall totals, show user totals if user has more
   than one entry;
*) lcd - retrieving '/system lcd page' configuration did not work with
    hundreds of interfaces;
*) webfig - added ability to reorder fields in skins;
*) webfig - added ability to add/remove new tabs & separators in skins;
*) webfig - added ability to add any field to special status page;
*) webfig - fixed problem when user sometimes got logged out with message
   "internal server error";
*) webfig - logout didn't log user out from router;
*) webfig - added System/Password for changing user's own password;
*) system reset-configuration - if keep-users is specified ssh user keys are
   preserved as well;
*) ipsec - new exchange mode (main-l2tp) for l2tp tunnel users to allow
    FQDN as a peer ID with preshared key authorization in main mode;
*) ssh - fix possible server crash when connection is interrupted;
*) improved ipv4 forwarding performance on all boards with simple configuration
    by up to 30%;
*) add passthrough setting to change-dscp, change-ttl, change-mss,
    strip-ipv4-options, change-hop-limit mangle targets;
*) ipsec - fixed problem of RB1200 rebooting when large amount of UDP traffic is 
   sent through IPsec;
*) sniffer - added more useful packet filtering options, also available as quick
    mode command parameters;

What's new in 5.6 (2011-Aug-02 14:45):

*) ipsec - fix a problem which could silently remove a manual policy
    from the kernel if the peer configuration has 'generate-policy' set to 'yes'
    and if the policy matches with the traffic selector of a SA being removed
    on the responder side, also fix a problem that some generated policies
    may stay in kernel after relevant SA was removed;
*) profiler - correctly show idle task on RB1200;
*) webfig - fix dual nstreme interface setting lists;
*) webfig - fix Wireless Access/Connect List editing;
*) webfig - fix bitrate presentation in simple queues (show 1.5M as 1500k);
*) fixed micro-sd access on RB400 not to stop everything else;
*) sstp - when server certificate verification is enabled for sstp client,
    it will additionally compare IP addresses found in certificate's
    subjectAltName and subject CN to the real address, DNS names are ignored;
*) tftp - optional block counter roll-over support;
*) hotspot - fixed possible crash in case of multiple Radius CoA requests;
*) userman - speedup user deletion with big log size,
    note that first userman startup after this update
    may take few minutes if the log size is in hundreds of MB;
*) mpls - added support for enabling/disabling control word usage for
   BGP based VPLS tunnels (both - Cisco and RFC 4761 based);
*) mpls - added support for auto-discovery of VPLS NLRI encoding method
   for Cisco BGP based VPLS tunnels;
*) winbox - sometimes after disconnecting, winbox could not connect back;
*) gre,ipip tunnels - new dscp parameter (0..63 or inherit);
*) ping - new dscp parameter;

What's new in 5.6:

*) bgp - allow parallel operation of RFC4761 "l2vpn" and
    draft-ietf-l2vpn-signaling "l2vpn-cisco" BGP VPLS variants inside
    single peering session.
*) console - ":resolve" command now returns IPv6 address for domain names
    that have only IPv6 address records;
*) snmp - provide ups alarms for bad or low battery or for ups overload;
*) route - fixed SNMP getnext queries, were failing to find next
    prefix in the OID order;

What's new in 5.5 (2011-Jun-20 14:43):

*) console - resolved problem that appeared in version 5.4. it caused
    'sup-output' command to crash console on systems with many ethernet
    interfaces or very long interface names.
*) serial console - do not automatically send login prompt to attached
   usb modem if no other serial port exists;
*) winbox - fixed scrolling in terminal window;
*) webfig - encrypt whole session even in non https mode;
*) do not show contents of skin files to users without
   'sensitive' permission;

What's new in 5.4 (2011-May-27 13:18):

*) webfig - do not try to open many windows
   if first open was blocked by browser;
*) RB4xx ether1 port flapping fixed;

What's new in 5.3 (2011-Apr-29 15:05):

*) snmp - fix table get next with partial row keys;
*) snmp - respond from correct source address when multiple exist;
*) snmp - fix possible interface disappearing when walking ipNetToMediaTable;
*) snmp - fix possible memory leak;
*) ipsec - flush SAs and inform peer when rebooting or shutting down;
*) openvpn - fixed crash;
*) implemented terminal in WebFig;
*) implemented Skin mode in WebFig;
*) added support for more Broadcom Tigon3 based ethernet cards;
*) winbox - fixed byte to KiB, MiB and GiB conversion
  (digit after decimal point could be a bit off);
*) console - align numbers right in tabular print output;
*) fixed RB450G, RB750G switch chip slow ethernet problem;
*) fix vlan disable not taking effect;
*) userman - fix Authorize.Net payment bypass;
*) userman - added profile option to overwrite shared users option
    in user settings when profile is activated;
*) userman - fix db backup if it's size exceeds 2G;
*) wireless - merged ht-extension-channels in to channel-width;

What's new in 5.2 (2011-Apr-21 09:36):

*) fixed webfig;
*) console - fixed problem with supout file generation and export that
    appeared in version 5.1, it was causing console to enter busy loop
    on some boards;
*) ssh client - added source address and remote command options;
*) user manager - added /tool usermanager profile;

What's new in 5.1 (2011-Apr-08 12:55):

*) ipsec - fix SA lifetime display when timezone offset does not equal 0;
*) ipsec - now default DPD interval is 2 min for new configurations;
*) webfig - make bandwidth-test work;
*) fixed problem - wireless package got disabled after upgrading from v4;
*) sstp - fix problems on multicore systems;