RouterBOOT changelog

What's new in 2.33:

• ) added support for Groove;
• ) added support for RB751G;

What's new in 2.32:

• ) fixed beep after failed flashfig on SXT 5HnD;

What's new in 2.31:

• ) Slight SXT booting speed improvement
• ) Flashfig initialization improvements (makes sound if Flashfig server not used)

What's new in 2.30:

• ) fixed RB1000 not to reset configuration all the time (broken in v2.29);

What's new in 2.29:

• ) fixed rare issue with large nand booting;
• ) fixed RB800 and RB1100 to turn on user led during boot-up;
• ) fixed RB711 to turn off user led during boot-up;

What's new in 2.28:

• ) fixed problem - wireless did not show up on some RB411 units with 18V PoE power supply;

What's new in 2.27:

• ) memory fix for RB800/RB1000/RB1100;
• ) fixed problem - sometimes wireless was missing on RB711 after reboot;
• ) fixed pin-hole reset on RB750G;

What's new in 2.26:

• ) added RB816 support on RB600;
• ) fixed router hangup during etherboot if blasted with lots of packets;
• ) added silent boot;
• ) fixed Flashfig;

What's new in 2.25:

• new feature - Flashfig;
• fixed etherboot on RB493;
• fixed occasional lockup of kernel image loading on RB400 series;
• added disable UART feature;

What's new in 2.24:

• added support for RB816;

What's new in 2.23:

• added support for RB750G;
• added support for RB800;

What's new in 2.22:

• fixed support for RB750;

What's new in 2.21:

• added support for RB750;

What's new in 2.20:

• added support for RB450G;

What's new in 2.19:

• fixed support for MLC NAND chip;
• fixed memory issue on RB600;

What's new in 2.18:

• fixed via-rhine disappearing on RB532 and RB564;
• added support for RB493AH;

What's new in 2.17:

• added support for MLC NAND chip;

What's new in 2.16:

• fixed bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
• fixed bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

• fixed RB333 overheating problem;
• added support for microSD card on RB433;

What's new in 2.14:

• fixed nand boot on RB150 (broken in v2.13);

What's new in 2.13:

• improved memtest;
• fixed RB600 memory issue;

What's new in 2.12:

• nand improvement for RB532A;

What's new in 2.11:

• fixed bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

• 100ms delay before PCI bus are initialized;

What's new in 2.9:

• added support for RB192;

What's new in 2.8:

• fixed CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

• fixed bug - RouterOS command "/system reset-configuration"

was not resetting RB532 VIA ethernet mac address to default;

• added support for RB532r5;

What's new in 2.6:

• fixed CompactFlash reseting router config on RB153;

What's new in 2.4:

• fixed etherboot on RB100 to work reliably;

What's new in 2.2:

• fixed repeated initrd image loading;

What's new in 2.1:

• fixed crash during memory test within RouterBOOT;

What's new in 2.0:

• added support for RB153;

What's new in 1.13:

• fixed nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

• reset-jumper resets bios settings to defaults;

What's new in 1.11:

• fixed reboot failure on RB500 with new RAM modules;

What's new in 1.10:

• added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

• new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

• fixed bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

• added nand format feature;

What's new in 1.3:

• added support for large block NAND devices;

What's new in 1.2:

• fixed bios entering on key for hyperterminal;
• routerboard 100 beep before jumping to kernel code;
• added nand READY/BUSY checking for rb100;
• improved speed for memory test;